Electro-magneto temperature-dependent vibration analysis of functionally graded-carbon nanotube-reinforced piezoelectric Mindlin cylindrical shells resting on a temperature-dependent,orthotropic elastic medium

Vibration smart control analysis of a temperature-dependent functionally graded-carbon nanotube-reinforced piezoelectric cylindrical shell embedded in an orthotropic elastic medium is investigated. The mixture law is used for obtaining the material properties of the structure. The structure is subjected to a 2D magnetic field. Considering the first-order shear deformation theory, the motion equations are obtained. Based on an analytical method and differential quadrature method, the frequency is calculated. The effects of applied voltage, magnetic field, volume percent, and distribution type of carbon nanotubes, temperature, orthotropic elastic medium, and length to radius ratio of the shell are shown on system frequency.     

Simulation study on the influence of magnetic field in the near-anode region on anode power deposition of ATON-type Hall thruster

The highest deposition of power and temperature is always near the cusp of the ATON-type Hall thruster. This shows that when there are electrons gathering at the cusp, the distribution of heat load will be uniform, which will potentially damage the reliability. Therefore, we optimize the magnetic field near the anode. We changed the magnetic field characteristics in the near-anode region with an additional magnetic screen, and performed numerical simulation with particle-incell simulation. The simulation results show that the magnetic field of the thruster with the additional magnetic screen can alleviate the over-concentration of power deposition on the anode and reduce the power deposition in the anode by 20%, while ensuring that the overall magnetic field characteristics do not change significantly.     

双盘式磁力耦合器振动噪声分析与实验研究

为了在双盘式磁力耦合器设计阶段分析振动噪声特性,优化双盘式磁力耦合器设计,提出了一种利用模态叠加原理来分析其振动噪声的方法。双盘式磁力耦合器具有高转矩密度与高效率等优势,因此逐渐发展成为煤矿机械柔性传动装置。由于双盘式磁力耦合内部的转子磁场非正弦分布以及涡电流谐波等因素影响,双盘式磁力耦合器输出转矩中不可避免的存在波动。若根据计算得出的双盘式磁力耦合器的电磁振动噪声特点,在设计时选取振动噪声小的参数进行优化组合,可在实际中降低其电磁振动及噪声,有利于减少制造成本。本文结合双盘式磁力耦合器的结构特征,提出了一种模态叠加响应法计算电磁振动噪声,建立了其电磁径向力的解析模型,并在多物理场耦合作用下分析主要电磁径向力波在工作频率内的谐波响应,最后在额定功率为55 kW双盘式磁力耦合器实验台上进行试验验证。基于麦克斯韦张量法,建立了双盘式磁力耦合器的径向电磁力解析模型,并得出0阶与10阶电磁径向力波是产生振动噪声的最主要原因;利用多物理场耦合分析法进行谐波响应NVH特性分析,结果显示0阶力波的振动加速度与形变量均大于10阶力波的振动加速度与形变量,因此双盘式磁力耦合器的电磁振动主要来源于0阶力波;在额定功率为55 kW,最高转速为1 500 r/min的双盘式磁力耦合器实验台进行振动测试,试验结果显示在1 500 r/min时,试验得出的最大振动峰值及频率约为35 m/s^2和4 950 Hz,与有限元仿真结果的误差对应为6.3%和1.1%;而当变频电机的输入转速依次增大时,振动加速度的理论值、仿真值与试验值的曲线形态较为接近,误差较小;噪声估计值与实测值的最大误差仅为8.9%,基本验证了本文所提出模态叠加法的正确性。     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

磁性纳米材料处理含铀废水的研究进展

磁性纳米材料具有较强的化学稳定性、可再生回收、良好的吸附性能和易于分离等优点，在去除水溶液中的铀酰离子方面有广泛的应用前景。然而，磁性纳米材料也存在易团聚、易氧化等不足，通过表面修饰或改性等方法可改善其不足，提高其对废水中铀酰离子的去除能力，改善其吸附效果。本文通过总结近年来的相关研究资料，概括了磁性纳米材料的种类，归纳总结并比较了不同种类磁性纳米材料对含铀废水的去除能力及优势与不足，探讨了磁性纳米材料在含铀废水处理中的应用并对其机理进行了分析，阐述了磁性纳米材料去除溶液中铀酰离子的影响因素，简述了目前磁性纳米材料在处理含铀废水中有待解决的问题，并对其在分离放射性元素方面的应用前景进行了展望。     

某贫磁赤铁矿石选矿工艺试验研究

为了使某矿山贫磁赤铁矿资源得到合理的开发利用，针对现开采部位矿石的性质和可选性问题，进行了工艺矿物学和可选性试验研究。试验结果表明：采用弱磁、强磁—阴离子反浮选工艺可得到精矿铁品位68.55%、精矿产率36.41%、金属回收率79.92%、尾矿品位9.86%的较好选别指标，说明矿石的可选性较好，为该矿石的合理开发利用提供了可靠的技术依据。     

机电复合作用下发电电动机磁极连接线建模及应力分析

针对抽水蓄能机组发电电动机转子磁极连接线现有设计校核往往仅考虑单一机械应力作用,提出计及机端短路故障的机电复合作用下发电电动机磁极连接线建模及应力分析方法。首先,基于有限元方法建立某抽水蓄能机组发电电动机转子结构有限元模型,得到磁极连接线不同工况下单一机械应力结果,然后建立机端三相短路故障下发电电动机电磁场有限元模型,得到计及故障下电磁力作用的机电复合应力结果。结果表明,磁极连接线飞逸工况下承受机械应力约为额定工况时的2倍,电磁力对磁极连接线不同区域影响不均,受力方向和大小的变化规律与机械应力不同,机电复合作用下会造成磁极连接线局部应力激增。     

Magneto-rotation-fibre-reinforced thermoelastic with gravity and energy dissipation

In this article, two theories of the generalized thermoelasticity Green-Naghdi theory (of type II and III) are applied, as well as the coupled theory to study the effect of magnetic field and rotation under influence of gravity on 2D problem of a fibre-reinforced thermoelastic. The normal mode analysis is used to obtain the expressions for the temperature, displacement components and the thermal stresses distributions. The resulting formulation is applied for two different concrete problems. The first concerns the case of a punch moving across the surface of semi-infinite thermoelastic half-space subjected to appropriate boundary conditions. The second deals with a thick plate subjected to a time-dependent heat source on each face. Numerical results are illustrated graphically for each problem considered. A comparison is made with the results predicted obtained by the two theories in the presence and absence of magnetic field, rotation and gravity field.     

电工钢磁性检测方法国家标准应用问题和解决方案

通过对电工钢交流磁性检测方法现行国家标准（爱泼斯坦方圈法和标准单片法）在应用中存在的问题进行了梳理和解析，认为主要问题包括次级电压波形失真时需修正比总损耗、约定的有效磁路长度并非实际有效磁路长度以及磁性测量系统校准方法缺失等，并提出了采用数字反馈控制技术控制次级电压波形无需修正比总损耗、取向硅钢单片法测量时采用475 mm有效磁路长度以及磁性测量系统综合校准方案等一些解决方案。